| This documentation is out of date.
The new version of the documentation is here: https://cannylogic.com/docs |
Welcome to CANNY Wiki!
From CANNY Wiki
Revision as of 08:20, 18 March 2016 by MEGA (Talk | contribs) (→Automotive Programmable Logic Controller CANNY 7)
CANNY's original documentation has been written in Russian. You can find it here: http://wiki.canny.ru
Now we intensively translate it in English. You can watch this works progress below on this page.
For now and always we ready to answer any your question here and here.
RU = Not translated yet! Text is in Russian BUT all pictures is in English now.
EN = Translated.
EN = Translated need to check.
CANNY Lab Integrated Development Environment
- RU CANNY Lab - Main article
- RU Main window - CANNY Lab Main window, tools and menu
- RU Functional Diagram Editor mode - Functional diagram editor description and basic operations
- RU Simulator mode - CANNY Lab IDE simulator mode
- RU Interaction with equipment - CANNY Lab IDE and controller interaction
- RU Firmware Update Utility - Creating and using SFX-Files
Functional Block Diagrams
- EN CFD Language - The Canny Functional Diagram graphical language
- EN Built-in Function Blocks - The set of CFD Built-in Function Blocks
Automotive Programmable Logic Controller CANNY 7
- EN CANNY 7 - Main article
- RU Programmable Logic Controller - General information about the programmable logic controllers
- EN System Registers - Managing system operation and indication
- EN Discrete Inputs and Outputs - Using IO channels in a discrete mode and low-resolution PWM mode (1 ms)
- EN High Resolution PWM - Using IO channels #1 and #2 in high-resolution PWM mode (1 us)
- EN UART / RS232 / Modbus - Using IO channels #9 and #10 in serial data interface asynchronous mode.
- EN CAN Interface - Configuring and using built-in CAN-Interface
- EN LIN - Using IO channels #9 and #10 in LIN MASTER or LIN SLAVE modes.
- RU I²C - Configuring and using channels in MASTER mode of synchronous serial data interface I²C
- RU Dallas® 1-Wire® - Configuring and using channels in MASTER mode of asynchronous serial data interface 1-Wire®
- RU User pre-Programmed Parameters - Access to parameters, set by the user when loading a software to the controller with Firmware Update Utility
- RU EEPROM Non-volatile Memory - Writing and reading data to/from non-volatile memory
- RU Infrared Remote Control Driver - Configuring and using channels for receiving and transmitting IR remote control commands
