This documentation is out of date.

The new version of the documentation is here: https://cannylogic.com/docs

Difference between revisions of "PWM Generator"

From CANNY Wiki
Jump to: navigation, search
m
Line 44: Line 44:
  
 
<div>
 
<div>
Non-zero value at the input "Start", generates а logic one at the output with a predetermined duration and periodicity.
+
Non-zero value at the input "Start", generates a logic one at the output with a predetermined duration and periodicity.
  
 
[[File:5_8_3_3.png|left|thumb|Pulse signal parameters]]
 
[[File:5_8_3_3.png|left|thumb|Pulse signal parameters]]
Line 51: Line 51:
 
<br clear="left">
 
<br clear="left">
  
For asynchronous generation of the precision PWM signal at the output using[[Драйвер каналов ввода-вывода#Режим широтно-импульсного выхода| Драйвер каналов ввода-вывода]] or [[Драйвер высокочастотного широтно-импульсного модулятора (ВЧ ШИМ) | Драйвер ВЧ ШИМ]]
+
For asynchronous generation of the precision PWM signal at the output using[[CANNY_7,_Discrete_IO_Driver#PWM_output_mode | Discrete IO Driver]] or [[CANNY_7,_HR_PWM_Driver | HR PWM Driver]]
  
 
== Features ==
 
== Features ==
 
When working with CANNY 7, it is a good practice to use the time intervals greater than 5-10 ms.
 
When working with CANNY 7, it is a good practice to use the time intervals greater than 5-10 ms.
  
When specifying temporal values on the diagram, it is necessary to take into account the duration of the diagram execution cycle, which depends on the model of the controller, the size of the chart, controllers' operation mode, controller periphery.  It may be varied from cycle to cycle within certain limits during operation. Exact execution time for each cycle is available in the register, during controller operation [[System Registers#Фактическое время выполнения функциональной диаграммы | "Длительность программного цикла"]].
+
When specifying temporal values on the diagram, it is necessary to take into account the duration of the diagram execution cycle, which depends on the model of the controller, the size of the chart, controllers' operation mode, controller periphery.  It may be varied from cycle to cycle within certain limits during operation. Exact execution time for each cycle is available in the register, during controller operation [[CANNY_7,_System_Registers#Function_Diagram_actual_run_time | "Last Execution Loop Duration Register"]].
  
 
Time intervals in the diagram should not be specified by value less than the duration of one cycle and will be measured with an uncertainty about the duration of one cycle of a user diagram.  
 
Time intervals in the diagram should not be specified by value less than the duration of one cycle and will be measured with an uncertainty about the duration of one cycle of a user diagram.  

Revision as of 20:01, 13 December 2016

Appearance
5 8 3 2.png
Symbol
PWM
Group
Timers and Generators
Inputs
Period, мс: Integer
Duty, мс: Integer
Startт: Logical
Outputs
Выход: Logical
Version CANNY Lab
from 0.6b
Icon

Non-zero value at the input "Start", generates a logic one at the output with a predetermined duration and periodicity.

Pulse signal parameters


For asynchronous generation of the precision PWM signal at the output using Discrete IO Driver or HR PWM Driver

Features

When working with CANNY 7, it is a good practice to use the time intervals greater than 5-10 ms.

When specifying temporal values on the diagram, it is necessary to take into account the duration of the diagram execution cycle, which depends on the model of the controller, the size of the chart, controllers' operation mode, controller periphery. It may be varied from cycle to cycle within certain limits during operation. Exact execution time for each cycle is available in the register, during controller operation "Last Execution Loop Duration Register".

Time intervals in the diagram should not be specified by value less than the duration of one cycle and will be measured with an uncertainty about the duration of one cycle of a user diagram.


Examples

5 8 3 4.png
Timing diagram

See also

Delayed turning OFF

Delayed turning ON

RND Generator

Built-in Function Blocks