This documentation is out of date.

The new version of the documentation is here: https://cannylogic.com/docs

Constant

From CANNY Wiki
Revision as of 21:41, 19 November 2015 by CANNY (Talk | contribs)


Jump to: navigation, search
Appearance
Изображение:5_2_1_2.png
Symbol
:=
Group
Set and Copy
Version CANNY Lab
from 1.0

left|Иконка

Special functional diagram element allows to set networks or register initial values, constant during entire operation time of the diagram. Most often, this element is used to configure controllers' hardware resources or functional diagram parameters initiation. Constants can be set manually to use in arithmetic and logical operations in various numbering systems, using constants setting dialogue установки значения константы or using constants set values ​​for some of the registers in the controller, by selecting from constants directory справочника именованных констант.


Features

Prior to CANNY Lab version 1.0, send the constant to the register of the controller was possible only by using function block "Setting", appearing on many early demonstration video CANNY Lab. With the release CANNY Lab ver. 1.0 need for this type of blocks disappeared and the block was abolished.

Examples

thumb|Пример 1 thumb|Пример 2 thumb|Пример 3

See also

Copy

Built-in Function Blocks