This documentation is out of date.
The new version of the documentation is here: https://cannylogic.com/docs |
Difference between revisions of "CANNY 5.2 duo"
From CANNY Wiki
[unchecked revision] | [unchecked revision] |
(→EEPROM Non-volatile Memory) |
(→EEPROM Non-volatile Memory) |
||
Line 4: | Line 4: | ||
:''Main article'': '''[[CANNY 5.2 duo, EEPROM Driver]]''' | :''Main article'': '''[[CANNY 5.2 duo, EEPROM Driver]]''' | ||
− | To eliminate loss of critical information (state of the controller, external devices status, and so on..) I case of power reset , CANNY 5 duo controller equipped with non-volatile memory. The values saved in EEPROM will be available in special registers after the power is restored. | + | To eliminate loss of critical information (state of the controller, external devices status, and so on..) I case of power reset , CANNY 5.2 duo controller equipped with non-volatile memory. The values saved in EEPROM will be available in special registers after the power is restored. |
There are 64 16-bit non-volatile memory cells, which are accessed by corresponding read and write registers. | There are 64 16-bit non-volatile memory cells, which are accessed by corresponding read and write registers. |
Revision as of 18:51, 13 December 2016
EEPROM Non-volatile Memory
- Main article: CANNY 5.2 duo, EEPROM Driver
To eliminate loss of critical information (state of the controller, external devices status, and so on..) I case of power reset , CANNY 5.2 duo controller equipped with non-volatile memory. The values saved in EEPROM will be available in special registers after the power is restored.
There are 64 16-bit non-volatile memory cells, which are accessed by corresponding read and write registers.
Note: | Working with non-volatile memory does not require any special pre-configuration. |