| This documentation is out of date.
The new version of the documentation is here: https://cannylogic.com/docs |
Difference between revisions of "CANNY 5.2 duo"
From CANNY Wiki
(Created page with " === EEPROM Non-volatile Memory === :''Main article'': '''CANNY 5 duo, EEPROM''' To eliminate loss of critical information (state of the controller, external devices sta...") |
(No difference)
|
Revision as of 18:48, 13 December 2016
EEPROM Non-volatile Memory
- Main article: CANNY 5 duo, EEPROM
To eliminate loss of critical information (state of the controller, external devices status, and so on..) I case of power reset , CANNY 5 duo controller equipped with non-volatile memory. The values saved in EEPROM will be available in special registers after the power is restored.
There are 64 16-bit non-volatile memory cells, which are accessed by corresponding read and write registers.
| Note: | Working with non-volatile memory does not require any special pre-configuration. |
