This documentation is out of date.

The new version of the documentation is here: https://cannylogic.com/docs

Difference between revisions of "Constant"

From CANNY Wiki
Jump to: navigation, search
Line 27: Line 27:
  
 
<div>
 
<div>
Special functional diagram element allows to set networks or register initial values, constant during entire operation time of the diagram.
+
Special functional diagram element allows to set networks or register initial constant values for entire operation time of the diagram.
 
Most often, this element is used to configure controllers' hardware resources or functional diagram parameters initiation.
 
Most often, this element is used to configure controllers' hardware resources or functional diagram parameters initiation.
 
Constants can be set manually to use in arithmetic and logical operations in various numbering systems, using constants setting dialogue [[Редактор функциональных диаграмм#Константы|установки значения константы]]  or using constants set values ​​for some of the registers in the controller, by selecting from constants directory [[Редактор функциональных диаграмм#Константы|справочника именованных констант]].
 
Constants can be set manually to use in arithmetic and logical operations in various numbering systems, using constants setting dialogue [[Редактор функциональных диаграмм#Константы|установки значения константы]]  or using constants set values ​​for some of the registers in the controller, by selecting from constants directory [[Редактор функциональных диаграмм#Константы|справочника именованных констант]].
Line 36: Line 36:
 
== Features ==
 
== Features ==
  
Prior to CANNY Lab version 1.0, sending constant to the register of the controller was possible only by using functional block "Setting", appearing on many early demonstration videos of CANNY Lab. With the release of CANNY Lab ver. 1.0  need for this type of blocks disappeared and the block was abolished.
+
Prior to CANNY Lab version 1.0, sending constant to the register of the controller was possible only by using functional block "Constant value assignment", appearing on many early demonstration videos of CANNY Lab. With the release of CANNY Lab ver. 1.0  need for this type of blocks disappeared and the block was abolished.
  
 
== Examples ==
 
== Examples ==

Revision as of 09:38, 20 November 2015

Appearance
Изображение:5_2_1_2.png
Symbol
:=
Group
Set and Copy
Version CANNY Lab
from 1.0

left|Иконка

Special functional diagram element allows to set networks or register initial constant values for entire operation time of the diagram. Most often, this element is used to configure controllers' hardware resources or functional diagram parameters initiation. Constants can be set manually to use in arithmetic and logical operations in various numbering systems, using constants setting dialogue установки значения константы or using constants set values ​​for some of the registers in the controller, by selecting from constants directory справочника именованных констант.


Features

Prior to CANNY Lab version 1.0, sending constant to the register of the controller was possible only by using functional block "Constant value assignment", appearing on many early demonstration videos of CANNY Lab. With the release of CANNY Lab ver. 1.0 need for this type of blocks disappeared and the block was abolished.

Examples

thumb|Пример 1 thumb|Пример 2 thumb|Пример 3

See also

Copy

Built-in Function Blocks