Editing Welcome to CANNY Wiki! (section)

=== Automotive Programmable Logic Controller CANNY 5.3 pico ===

* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico]] - Main article
* <span style="color:#fff000">'''EN'''</span> [[CANNY 7, PLC | Programmable Logic Controller]] - General information about the programmable logic controllers
* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico, System Registers | System Registers]] - Managing system operation and indication
* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico, Discrete IO Driver | Discrete Inputs and Outputs]] - Using IO channels in a discrete mode and low-resolution PWM mode (1 ms)
* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico, HR PWM Driver | High Resolution PWM]] - Using IO channels #1 and #2 in high-resolution PWM mode (1 us)
* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico, UART Driver | UART / RS232 / Modbus]] - Using IO channels #9 and #10 in serial data interface asynchronous mode
* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico, CAN Driver |CAN Interface]] - Configuring and using built-in CAN-Interface
* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico, LIN Driver | LIN]] - Using IO channels #9 and #10 in LIN MASTER or LIN SLAVE modes
* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico, User Preprogrammed Parameters | User pre-Programmed Parameters]] - Access to parameters, set by the user when loading a software to the controller with [[Firmware Update Utility | Firmware Update Utility]]
* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico, EEPROM Driver | EEPROM Non-volatile Memory]] - Writing and reading data to/from non-volatile memory
* <span style="color:#fff000">'''EN'''</span> [[CANNY 5.3 pico, ADC Driver | Analog-to-digital converter (ADC)]] - Configuration and operation with the controller in analog-to-digital converter mode